function init()
{
	//Main Menu items:
	menus[0] = new menu(260, "vertical", 30, 180, -20, -1, "#99FF66", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, true, true, 5, true, 4, 4, "black");
	menus[0].addItem("", "", 22, "left", "CONTROLLERS", 2);
	menus[0].addItem("", "", 22, "left", "DIRECT COUPLED ACTUATORS", 7);
	menus[0].addItem("", "", 22, "left", "IAQ SENSORS & MONITORS", 38);
	menus[0].addItem("", "", 22, "left", "INSTRUMENTS, TEST & MEASUREMENT", 45);
	menus[0].addItem("", "", 22, "left", "PANELS & ENCLOSURES", 50);
	menus[0].addItem("", "", 22, "left", "POWER SUPPLIES", 51);
	menus[0].addItem("", "", 22, "left", "RELAYS", 54);
	menus[0].addItem("", "", 22, "left", "SENSORS", 73);
	menus[0].addItem("", "", 22, "left", "SMOKE DETECTORS", 78);

	//Main Menu items:
	menus[1] = new menu(260, "vertical", 320, 180, -20, -1, "#99FF66", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, true, true, 5, true, 4, 4, "black");
	menus[1].addItem("", "", 22, "left", "SWITCHES", 81);
	menus[1].addItem("", "", 22, "left", "TEMPERATURE SENSORS", 97);
	menus[1].addItem("", "", 22, "left", "THERMOSTATS", 100);
	menus[1].addItem("", "", 22, "left", "THERMOSTAT GUARDS", 111);
	menus[1].addItem("", "", 22, "left", "TRANSDUCERS", 113);
	menus[1].addItem("", "", 22, "left", "TRANSFORMERS", 118);
	menus[1].addItem("", "", 22, "left", "TRANSMITTERS", 123);
	menus[1].addItem("", "", 22, "left", "VALVES", 137);
	menus[1].addItem("", "", 22, "left", "VAV ANALOG CONTROLS", 147);

//Sub Menu for Controllers:
	menus[2] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[2].addItem("", "", 22, "left", "FREEZESTATS", 3);
	menus[2].addItem("fs200.htm", "", 22, "left", "HIGH LIMITS", 0);
	menus[2].addItem("", "", 22, "left", "LEAD/LAG", 4);
	menus[2].addItem("", "", 22, "left", "LOW LIMITS", 5);
	menus[2].addItem("bktd110.htm", "", 22, "left", "REMOTE BULB", 0);

//Sub Menu for Freezestats:
	menus[3] = new menu(165, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[3].addItem("fs30.htm", "", 22, "left", "SPDT Manual Reset", 0);
	menus[3].addItem("fs33.htm", "", 22, "left", "SPDT Automatic Reset", 0);
	menus[3].addItem("fs50.htm", "", 22, "left", "DPDT Manual Reset", 0);
	menus[3].addItem("fs53.htm", "", 22, "left", "DPDT Automatic Reset", 0);
	menus[3].addItem("fx4520.htm", "", 22, "left", "Capillary Mounting Clip", 0);

//Sub Menu for Lead/Lag:
	menus[4] = new menu(210, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[4].addItem("", "", 22, "left", "Circulation Pump Sequencer", 5);
	menus[4].addItem("", "", 22, "left", "Boiler Sequencer", 6);

//Sub Menu for Circulation Pump Sequencer:
	menus[5] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[5].addItem("psp10.htm", "", 22, "left", "15A Enclosure", 0);
	menus[5].addItem("psp10cm.htm", "", 22, "left", "15A Panel Mount", 0);
	menus[5].addItem("psp12.htm", "", 22, "left", "30A Enclosure", 0);
	menus[5].addItem("psp12cm.htm", "", 22, "left", "30A Panel Mount", 0);

//Sub Menu for Boiler Sequencer:
	menus[6] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[6].addItem("bsp15.htm", "", 22, "left", "Enclosure", 0);
	menus[6].addItem("bsp15cm.htm", "", 22, "left", "Panel Mount", 0);

//Sub Menu for Direct Coupled Actuators:
	menus[7] = new menu(280, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[7].addItem("", "", 22, "left", "NON-SPRING RETURN ACTUATORS", 8);
	menus[7].addItem("", "", 22, "left", "FAIL SAFE ACTUATORS", 13);
	menus[7].addItem("", "", 22, "left", "ELECTRIC ROTARY ACTUATORS", 17);
	menus[7].addItem("", "", 22, "left", "VAV ANALOG CONTROLLER-ACTUATORS", 20);
	menus[7].addItem("", "", 22, "left", "PARTS & ACCESSORIES", 33);

//Sub Menu for Non Spring Return Actuators:
	menus[8] = new menu(145, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[8].addItem("", "", 22, "left", "50 in-lb Tri-State", 9);
	menus[8].addItem("", "", 22, "left", "50 in-lb 2-10 VDC", 10);
	menus[8].addItem("mep1261.htm", "", 22, "left", "100 in-lb Tri-State", 0);
	menus[8].addItem("mep1262.htm", "", 22, "left", "100 in-lb 2-10 VDC", 0);
	menus[8].addItem("", "", 22, "left", "150 in-lb Tri-State", 11);
	menus[8].addItem("mep7002.htm", "", 22, "left", "150 in-lb 2-10 VDC", 0);
	menus[8].addItem("", "", 22, "left", "300 in-lb Tri-State", 12);
	menus[8].addItem("mep7702.htm", "", 22, "left", "300 in-lb 2-10 VDC", 0);

//Sub Menu for 50 in-lb Tri-State:
	menus[9] = new menu(175, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[9].addItem("mep5061.htm", "", 22, "left", "5 min. Timing no Cover", 0);
	menus[9].addItem("mep5063.htm", "", 22, "left", "5 min. Timing w/Cover", 0);
	menus[9].addItem("mep5071.htm", "", 22, "left", "90 sec. Timing no Cover", 0);
	menus[9].addItem("mep5073.htm", "", 22, "left", "90 sec. Timing w/Cover", 0);

//Sub Menu for 50 in-lb 2-10 VDC:
	menus[10] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[10].addItem("mep5062.htm", "", 22, "left", "5 min. Timing", 0);
	menus[10].addItem("mep5072.htm", "", 22, "left", "90 sec. Timing", 0);

//Sub Menu for 150 in-lb Tri-State:
	menus[11] = new menu(145, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[11].addItem("mep7001.htm", "", 22, "left", "Tri-State", 0);
	menus[11].addItem("mep7003.htm", "", 22, "left", "Tri-State w/10K Pot.", 0);

//Sub Menu for 300 in-lb Tri-State:
	menus[12] = new menu(145, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[12].addItem("mep7701.htm", "", 22, "left", "Tri-State", 0);
	menus[12].addItem("mep7703.htm", "", 22, "left", "Tri-State w/10K Pot.", 0);

//Sub Menu for Fail Safe Actuators:
	menus[13] = new menu(145, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[13].addItem("mep5373.htm", "", 22, "left", "50 in-lb Tri-State", 0);
	menus[13].addItem("mep5372.htm", "", 22, "left", "50 in-lb 2-10 VDC", 0);
	menus[13].addItem("", "", 22, "left", "100 in-lb Tri-State", 14);
	menus[13].addItem("mep1272.htm", "", 22, "left", "100 in-lb 2-10 VDC", 0);
	menus[13].addItem("", "", 22, "left", "150 in-lb Tri-State", 15);
	menus[13].addItem("mep7052.htm", "", 22, "left", "150 in-lb 2-10 VDC", 0);
	menus[13].addItem("", "", 22, "left", "300 in-lb Tri-State", 16);
	menus[13].addItem("mep7752.htm", "", 22, "left", "300 in-lb 2-10 VDC", 0);

//Sub Menu for 100 in-lb Tri-State:
	menus[14] = new menu(145, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[14].addItem("mep1271.htm", "", 22, "left", "Tri-State", 0);
	menus[14].addItem("mep1273.htm", "", 22, "left", "Tri-State w/10K Pot.", 0);

//Sub Menu for 150 in-lb Tri-State:
	menus[15] = new menu(145, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[15].addItem("mep7051.htm", "", 22, "left", "Tri-State", 0);
	menus[15].addItem("mep7053.htm", "", 22, "left", "Tri-State w/10K Pot.", 0);

//Sub Menu for 300 in-lb Tri-State:
	menus[16] = new menu(145, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[16].addItem("mep7751.htm", "", 22, "left", "Tri-State", 0);
	menus[16].addItem("mep7753.htm", "", 22, "left", "Tri-State w/10K Pot.", 0);

//Sub Menu for Electric Rotary Actuators:
	menus[17] = new menu(140, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[17].addItem("", "", 22, "left", "Stroked CW", 18);
	menus[17].addItem("", "", 22, "left", "Stroked CCW", 19);
	menus[17].addItem("mep1504.htm", "", 22, "left", "No Stroke Stops", 0);

//Sub Menu for Stroked CW:
	menus[18] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[18].addItem("mep1503.htm", "", 22, "left", "45 Deg. Stroke", 0);
	menus[18].addItem("mep1502.htm", "", 22, "left", "60 Deg. Stroke", 0);
	menus[18].addItem("mep1501.htm", "", 22, "left", "100 Deg. Stroke", 0);

//Sub Menu for Stroked CW:
	menus[19] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[19].addItem("mep1507.htm", "", 22, "left", "45 Deg. Stroke", 0);
	menus[19].addItem("mep1506.htm", "", 22, "left", "60 Deg. Stroke", 0);
	menus[19].addItem("mep1505.htm", "", 22, "left", "100 Deg. Stroke", 0);

//Sub Menu for VAV Analog Controller-Actuators:
	menus[20] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[20].addItem("", "", 22, "left", "System Configurations", 21);
	menus[20].addItem("", "", 22, "left", "Controller-Actuators", 22);
	menus[20].addItem("", "", 22, "left", "Room Thermostats", 27);
	menus[20].addItem("", "", 22, "left", "Electronic Airflow Sensors", 30);
	menus[20].addItem("", "", 22, "left", "Diff. Pressure Airflow Sensors", 31);
	menus[20].addItem("", "", 22, "left", "Relay Modules", 32);

//Sub Menu System Configurations:
	menus[21] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[21].addItem("SECT11/11-1.pdf", "", 22, "left", "Electronic Flow Sensing", 0);
	menus[21].addItem("SECT11/11-2.pdf", "", 22, "left", "Diff. Pressure Airflow Sensors", 0);

//Sub Menu for Controller-Actuators:
	menus[22] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[22].addItem("", "", 22, "left", "100 Deg. Stroke", 23);
	menus[22].addItem("", "", 22, "left", "45 Deg. Stroke", 24);
	menus[22].addItem("", "", 22, "left", "5 Min. Timing", 25);
	menus[22].addItem("", "", 22, "left", "90 Sec. Timing", 26);

//Sub Menu for 100 Deg. Stroke:
	menus[23] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[23].addItem("cep4001.htm", "", 22, "left", "CCW w/SSE-1001", 0);
	menus[23].addItem("cep4011.htm", "", 22, "left", "CW w/SSE-1001", 0);
	menus[23].addItem("cep4012.htm", "", 22, "left", "CW w/SSE-1002", 0);
	menus[23].addItem("cep4013.htm", "", 22, "left", "CW w/SSE-2001", 0);
	menus[23].addItem("cep4015.htm", "", 22, "left", "CW Less Sensor", 0);

//Sub Menu for 45 Deg. Stroke:
	menus[24] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[24].addItem("cep4411.htm", "", 22, "left", "CW w/SSE-1001", 0);
	menus[24].addItem("cep4415.htm", "", 22, "left", "CW Less Sensor", 0);

//Sub Menu for 5 Min. Timing:
	menus[25] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[25].addItem("csp5001.htm", "", 22, "left", "0-10 VDC Input", 0);
	menus[25].addItem("tsp5002.htm", "", 22, "left", "2-10 VDC Input", 0);
	menus[25].addItem("tsp5003.htm", "", 22, "left", "Tri-State", 0);

//Sub Menu for 90 Sec. Timing:
	menus[26] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[26].addItem("tsp5022.htm", "", 22, "left", "2-10 VDC Input", 0);
	menus[26].addItem("tsp5023.htm", "", 22, "left", "Tri-State", 0);

//Sub Menu for Room Thermostats:
	menus[27] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[27].addItem("", "", 22, "left", "For 4000 Series", 28);
	menus[27].addItem("", "", 22, "left", "For CSP-5001", 29);

//Sub Menu for 4000 Series:
	menus[28] = new menu(188, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[28].addItem("cte100110.htm", "", 22, "left", "DA Cooling, 55-85 F", 0);
	menus[28].addItem("cte100111.htm", "", 22, "left", "DA Cooling, 13-29 C", 0);
	menus[28].addItem("cte100310.htm", "", 22, "left", "RA Heat/DA Cool, 55-85 F", 0);
	menus[28].addItem("cte100311.htm", "", 22, "left", "RA Heat/DA Cool, 13-29 C", 0);
	menus[28].addItem("cte100410.htm", "", 22, "left", "RA Rehat/DA Cool, 55-85 F", 0);
	menus[28].addItem("cte100411.htm", "", 22, "left", "RA Rehat/DA Cool, 13-29 C", 0);
	menus[28].addItem("cte110110.htm", "", 22, "left", "DA Fan Box Output, 55-85 F", 0);
	menus[28].addItem("cte110111.htm", "", 22, "left", "DA Fan Box Output, 13-29 C", 0);
	menus[28].addItem("cte110510.htm", "", 22, "left", "DA Night/DA Day, 55-85 F", 0);
	menus[28].addItem("cte110511.htm", "", 22, "left", "DA Night/DA Day, 13-29 C", 0);
	menus[28].addItem("hfo0027.htm", "", 22, "left", "Setpoint Stops", 0);

//Sub Menu for CSP-5001:
	menus[29] = new menu(195, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[29].addItem("cte510110.htm", "", 22, "left", "Single Setpoint DA", 0);
	menus[29].addItem("cte510210.htm", "", 22, "left", "Single Setpoint RA", 0);
	menus[29].addItem("cte510310.htm", "", 22, "left", "Dual Setpoint DA/RA", 0);
	menus[29].addItem("cte510410.htm", "", 22, "left", "Dual Setpoint DA/RA Reheat", 0);
	menus[29].addItem("cte510510.htm", "", 22, "left", "Dual Setpoint DA/DA", 0);
	menus[29].addItem("hfo0027.htm", "", 22, "left", "Setpoint Stops", 0);
	menus[29].addItem("hpo006011.htm", "", 22, "left", "Horiz. Celsius Scaleplate", 0);
	menus[29].addItem("hpo006110.htm", "", 22, "left", "Vert. Fahrenheit Scaleplate", 0);
	menus[29].addItem("hpo006111.htm", "", 22, "left", "Vert. Celsius Scaleplate", 0);

//Sub Menu for Electronic Airflow Sensors:
	menus[30] = new menu(185, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[30].addItem("sse1001.htm", "", 22, "left", "4-inch", 0);
	menus[30].addItem("sse2001.htm", "", 22, "left", "4-inch & Heat/Cool Therm.", 0);
	menus[30].addItem("sse1002.htm", "", 22, "left", "8-inch", 0);
	menus[30].addItem("sse2002.htm", "", 22, "left", "8-inch & Heat/Cool Therm.", 0);

//Sub Menu for Diff. Press. Airflow Sensors:
	menus[31] = new menu(105, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[31].addItem("sss1002.htm", "", 22, "left", "3-5/32 inch", 0);
	menus[31].addItem("sss1003.htm", "", 22, "left", "5-13/32 inch", 0);
	menus[31].addItem("sss1004.htm", "", 22, "left", "7-21/32 inch", 0);
	menus[31].addItem("sss1005.htm", "", 22, "left", "9-29/32 inch", 0);

//Sub Menu for Relay Modules:
	menus[32] = new menu(215, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[32].addItem("ree1004.htm", "", 22, "left", "Constant Vol. w/Changeover", 0);
	menus[32].addItem("ree1005.htm", "", 22, "left", "Heating/Cooling Changeover", 0);
	menus[32].addItem("ree4001.htm", "", 22, "left", "3-Stage Electric Heat, 0-6 vdc", 0);
	menus[32].addItem("ree5001.htm", "", 22, "left", "3-Stage Electric Heat, 0-10 vdc", 0);
	menus[32].addItem("ree4002.htm", "", 22, "left", "Fan w/2-Stage Reheat, 0-6 vdc", 0);
	menus[32].addItem("ree5002.htm", "", 22, "left", "Fan w/2-Stage Reheat, 0-10 vdc", 0);
	menus[32].addItem("ree4006.htm", "", 22, "left", "Time Prop. Wet Reheat", 0);

//Sub Menu for Parts & Accessories:
	menus[33] = new menu(225, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[33].addItem("", "", 22, "left", "End Switches for MEP-1500/5000", 34);
	menus[33].addItem("", "", 22, "left", "End Switches for MEP-7000/7700", 35);
	menus[33].addItem("cme2003.htm", "", 22, "left", "Feedback Potentiometer", 0);
	menus[33].addItem("hmo4536.htm", "", 22, "left", "Stroke Stop Kit", 0);
	menus[33].addItem("hmo4509.htm", "", 22, "left", "Damper Mount Kit", 0);
	menus[33].addItem("hfo0011.htm", "", 22, "left", "Reducer Bushing", 0);
	menus[33].addItem("hmo4517.htm", "", 22, "left", "Front Mounting Bracket", 0);
	menus[33].addItem("hmo4518.htm", "", 22, "left", "Snap-In Conduit Connector", 0);
	menus[33].addItem("hmo4520.htm", "", 22, "left", "Strain Relief Bushing", 0);
	menus[33].addItem("hmo4526.htm", "", 22, "left", "Female Conduit Connector", 0);
	menus[33].addItem("", "", 22, "left", "Pushrods", 36);
	menus[33].addItem("vtd0804.htm", "", 22, "left", "Swivel Ball Joint", 0);
	menus[33].addItem("", "", 22, "left", "Crankarms", 37);

//Sub Menu for End Switches for MEP-1500/5000:
	menus[34] = new menu(85, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[34].addItem("cme1002.htm", "", 22, "left", "SPDT", 0);
	menus[34].addItem("cme1004.htm", "", 22, "left", "(2) SPDT", 0);
	menus[34].addItem("cme1006.htm", "", 22, "left", "(3) SPDT", 0);

//Sub Menu for End Switches for MEP-7000/7700:
	menus[35] = new menu(85, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[35].addItem("cme7001.htm", "", 22, "left", "SPDT", 0);
	menus[35].addItem("cme7002.htm", "", 22, "left", "DPDT", 0);

//Sub Menu for Pushrods:
	menus[36] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[36].addItem("vtd12.htm", "", 22, "left", "5/16 in OD x 12 in. Long", 0);
	menus[36].addItem("vtd18.htm", "", 22, "left", "5/16 in OD x 18 in. Long", 0);
	menus[36].addItem("vtd24.htm", "", 22, "left", "5/16 in OD x 24 in. Long", 0);
	menus[36].addItem("vtd36.htm", "", 22, "left", "5/16 in OD x 36 in. Long", 0);
	menus[36].addItem("vtd48.htm", "", 22, "left", "5/16 in OD x 48 in. Long", 0);

//Sub Menu for Crankarms:
	menus[37] = new menu(200, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[37].addItem("vtd1403.htm", "", 22, "left", "3/8 in. Shaft, 3.18 in. Radius", 0);
	menus[37].addItem("vtd1406.htm", "", 22, "left", "3/8 in. Shaft, 4.93 in. Radius", 0);
	menus[37].addItem("vtd1404.htm", "", 22, "left", "1/2 in. Shaft, 3.18 in. Radius", 0);
	menus[37].addItem("vtd1405.htm", "", 22, "left", "1/2 in. Shaft, 4.93 in. Radius", 0);

//Sub Menu for IAQ Sensors & Monitors:
	menus[38] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[38].addItem("", "", 22, "left", "CO SENSORS", 39);
	menus[38].addItem("", "", 22, "left", "CO MONITORS", 40);
	menus[38].addItem("", "", 22, "left", "CO TEST METER", 41);
	menus[38].addItem("", "", 22, "left", "CO2 SENSORS", 42);

//Sub Menu for CO Sensors:
	menus[39] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[39].addItem("toxco1ma.htm", "", 22, "left", "0-400 PPM Sensor", 0);
	menus[39].addItem("toxco1mb.htm", "", 22, "left", "0-100 PPM Sensor", 0);
	menus[39].addItem("toxco1mc.htm", "", 22, "left", "0-200 PPM Sensor", 0);
	menus[39].addItem("toxco1na.htm", "", 22, "left", "0-400 PPM Sensor w/LCD", 0);
	menus[39].addItem("toxco1nb.htm", "", 22, "left", "0-100 PPM Sensor w/LCD", 0);
	menus[39].addItem("toxco1nc.htm", "", 22, "left", "0-200 PPM Sensor w/LCD", 0);
	menus[39].addItem("toxcocalkit.htm", "", 22, "left", "Field Calibration Kit", 0);

//Sub Menu for CO Monitors:
	menus[40] = new menu(230, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[40].addItem("cm202.htm", "", 22, "left", "0-250 PPM Monitor", 0);
	menus[40].addItem("cm203.htm", "", 22, "left", "0-250 PPM Monitor w/ AUD Alarm", 0);
	menus[40].addItem("cm200calkit.htm", "", 22, "left", "Field Calibration Kit", 0);

//Sub Menu for CO Test Meter:
	menus[41] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[41].addItem("co71.htm", "", 22, "left", "Digital CO Detector", 0);
	menus[41].addItem("ac319.htm", "", 22, "left", "Small Carrying Case", 0);
	menus[41].addItem("ac519.htm", "", 22, "left", "Large Carrying Case", 0);

//Sub Menu for CO2 Sensors:
	menus[42] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[42].addItem("", "", 22, "left", "Space Sensors", 43);
	menus[42].addItem("", "", 22, "left", "Duct Sensors", 44);

//Sub Menu for Space Sensors:
	menus[43] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[43].addItem("air2000.htm", "", 22, "left", "Analog", 0);
	menus[43].addItem("air2000d.htm", "", 22, "left", "Analog w/LCD", 0);
	menus[43].addItem("air2000r.htm", "", 22, "left", "Analog & Relay", 0);
	menus[43].addItem("air2000dr.htm", "", 22, "left", "Analog & Relay w/LCD", 0);
	menus[43].addItem("2000calkit.htm", "", 22, "left", "Field Calibration Kit", 0);

//Sub Menu for Duct Sensors:
	menus[44] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[44].addItem("air2000dm.htm", "", 22, "left", "Analog", 0);
	menus[44].addItem("air2000ddm.htm", "", 22, "left", "Analog w/LCD", 0);
	menus[44].addItem("air2000rdm.htm", "", 22, "left", "Analog & Relay", 0);
	menus[44].addItem("air2000drdm.htm", "", 22, "left", "Analog & Relay w/LCD", 0);
	menus[44].addItem("2000calkit.htm", "", 22, "left", "Field Calibration Kit", 0);

//Sub Menu for Instruments, Test & Measurement:
	menus[45] = new menu(290, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[45].addItem("em100a.htm", "", 22, "left", "POSITIVE & NEGATIVE PRESSURES", 0);
	menus[45].addItem("", "", 22, "left", "HUMIDITY & WET BULB w/CALC DEWPOINT", 46);
	menus[45].addItem("", "", 22, "left", "THERMOMETERS", 47);
	menus[45].addItem("dafm2.htm", "", 22, "left", "AIR VELOCITY w/CALCULATED CFM", 0);
	menus[45].addItem("co71.htm", "", 22, "left", "CARBON MONOXIDE DETECTION", 0);
	menus[45].addItem("", "", 22, "left", "DIGITAL MULTIMETERS", 48);
	menus[45].addItem("", "", 22, "left", "INSTRUMENT CARRYING CASES", 49);

//Sub Menu for Humidigy & Wet bulb w/Calc Dewpoint:
	menus[46] = new menu(90, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[46].addItem("dth10.htm", "", 22, "left", "Pen Type", 0);
	menus[46].addItem("dth30.htm", "", 22, "left", "Pocket Size", 0);
		
//Sub Menu for Thermometers:
	menus[47] = new menu(180, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[47].addItem("pdt550.htm", "", 22, "left", "Digital Pocket", 0);
	menus[47].addItem("inf150.htm", "", 22, "left", "Infrared Laser Targeting", 0);

//Sub Menu for Digital Multimeters:
	menus[48] = new menu(90, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[48].addItem("dm5b.htm", "", 22, "left", "Pocket", 0);
	menus[48].addItem("dm383b.htm", "", 22, "left", "Industrial", 0);
	menus[48].addItem("dl250.htm", "", 22, "left", "Clamp", 0);

//Sub Menu for Instrument Carrying Cases:
	menus[49] = new menu(90, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[49].addItem("ac319.htm", "", 22, "left", "Small Case", 0);
	menus[49].addItem("ac519.htm", "", 22, "left", "Large Case", 0);

//Sub Menu for Panels & Enclosures:
	menus[50] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[50].addItem("p14.htm", "", 22, "left", "12 in. x 14 in. x 4 in.", 0);
	menus[50].addItem("p18.htm", "", 22, "left", "16 in. x 18 in. x 6 in.", 0);
	menus[50].addItem("p24.htm", "", 22, "left", "20 in. x 24 in. x 6 in.", 0);
	menus[50].addItem("p36.htm", "", 22, "left", "24 in. x 36 in. x 6 in.", 0);
	menus[50].addItem("p48.htm", "", 22, "left", "36 in. x 48 in. x 8 in.", 0);
	menus[50].addItem("plock.htm", "", 22, "left", "REPLACMENT LOCK & KEY", 0);

//Sub Menu for Power Supplies:
	menus[51] = new menu(210, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[51].addItem("", "", 22, "left", "24 VAC, CLASS I AND CLASS II", 52);
	menus[51].addItem("", "", 22, "left", "VAC-TO-VDC REGULATED", 53);

//Sub Menu for 24 VAC, Class I and Class II:
	menus[52] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[52].addItem("tpb2020.htm", "", 22, "left", "Class I Panel Mount", 0);
	menus[52].addItem("tpb2021.htm", "", 22, "left", "Class I in Enclosure", 0);
	menus[52].addItem("tpb3030.htm", "", 22, "left", "Class II Panel Mount", 0);
	menus[52].addItem("tpb3031.htm", "", 22, "left", "Class II in Enclosure", 0);

//Sub Menu for VAC to VDC Regulated:
	menus[53] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[53].addItem("pps1.htm", "", 22, "left", "Track Mount", 0);
	menus[53].addItem("ps2001a1l.htm", "", 22, "left", "1.5A, 90-130 VAC Input", 0);
	menus[53].addItem("ps2001a3l.htm", "", 22, "left", "1.5A, 24-29 VAC Input", 0);
	menus[53].addItem("ps2002b1l.htm", "", 22, "left", "3.0A, set @ 24 VDC", 0);
	menus[53].addItem("ps2001b1l.htm", "", 22, "left", "3.0A, set @ 12 VDC", 0);
	menus[53].addItem("ps2001b3l.htm", "", 22, "left", "3.0A, set @ 5 VDC", 0);

//Sub Menu for Relays:
	menus[54] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[54].addItem("", "", 22, "left", "MULTI-VOLTAGE", 55);
	menus[54].addItem("", "", 22, "left", "PLUG-IN", 62);
	menus[54].addItem("", "", 22, "left", "SPUD MOUNT", 61);

//Sub Menu for Multi-Voltage:
	menus[55] = new menu(110, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[55].addItem("", "", 22, "left", "Track Mount", 56);
	menus[55].addItem("", "", 22, "left", "Surface Mount", 60);
	menus[55].addItem("", "", 22, "left", "Spud Mount", 61);

//Sub Menu for Track Mount:
	menus[56] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[56].addItem("", "", 22, "left", "24/115/230vac/24vdc", 57);
	menus[56].addItem("", "", 22, "left", "24/115vac/24vdc", 58);
	menus[56].addItem("", "", 22, "left", "24vac/24vdc", 59);

//Sub Menu for 24/115/230vac/24vdc:
	menus[57] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[57].addItem("mr101t.htm", "", 22, "left", "SPDT", 0);
	menus[57].addItem("mr101c.htm", "", 22, "left", "SPDT in Enclosure", 0);
	menus[57].addItem("mr201t.htm", "", 22, "left", "DPDT", 0);
	menus[57].addItem("mr201c.htm", "", 22, "left", "DPDT in Enclosure", 0);

//Sub Menu for 24/115vac/24vdc:
	menus[58] = new menu(80, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[58].addItem("mr801t.htm", "", 22, "left", "SPDT", 0);
	menus[58].addItem("mr804t.htm", "", 22, "left", "(4) SPDT", 0);
	menus[58].addItem("mr808t.htm", "", 22, "left", "(8) SPDT", 0);

//Sub Menu for 24vac/24vdc:
	menus[59] = new menu(80, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[59].addItem("mr601t.htm", "", 22, "left", "SPDT", 0);
	menus[59].addItem("mr604t.htm", "", 22, "left", "(4) SPDT", 0);
	menus[59].addItem("mr608t.htm", "", 22, "left", "(8) SPDT", 0);

//Sub Menu for Surface Mount:
	menus[60] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[60].addItem("pam1.htm", "", 22, "left", "24/115vac/24vdc", 0);
	menus[60].addItem("pam4.htm", "", 22, "left", "9-40vdc", 0);

//Sub Menu for Spud Mount:
	menus[61] = new menu(70, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[61].addItem("ric1.htm", "", 22, "left", "SPDT", 0);
	menus[61].addItem("ric2.htm", "", 22, "left", "DPDT", 0);

//Sub Menu for Plug-In:
	menus[62] = new menu(210, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[62].addItem("", "", 22, "left", "Idec Midget General Purpose", 63);
	menus[62].addItem("", "", 22, "left", "Idec Heavy Duty Octal Pin", 72);
	menus[62].addItem("bam1000.htm", "", 22, "left", "DIN Rail", 0);
	menus[62].addItem("bnl5.htm", "", 22, "left", "Mounting Clip", 0);

//Sub Menu for Idec Midget General Purpose:
	menus[63] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[63].addItem("", "", 22, "left", "SPDT", 64);
	menus[63].addItem("", "", 22, "left", "DPDT", 65);
	menus[63].addItem("", "", 22, "left", "DPDT w/LED", 66);
	menus[63].addItem("", "", 22, "left", "3PDT", 67);
	menus[63].addItem("", "", 22, "left", "3PDT w/LED", 68);
	menus[63].addItem("", "", 22, "left", "4PDT", 69);
	menus[63].addItem("", "", 22, "left", "4PDT w/LED", 70);
	menus[63].addItem("", "", 22, "left", "SOCKETS", 71);

//Sub Menu for SPDT:
	menus[64] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[64].addItem("rh1buac24v.htm", "", 22, "left", "24 vac", 0);
	menus[64].addItem("rh1budc24v.htm", "", 22, "left", "24 vdc", 0);
	menus[64].addItem("rh1buac120v.htm", "", 22, "left", "120 vac", 0);

//Sub Menu for DPDT:
	menus[65] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[65].addItem("rh2buac24v.htm", "", 22, "left", "24 vac", 0);
	menus[65].addItem("rh2budc24v.htm", "", 22, "left", "24 vdc", 0);
	menus[65].addItem("rh2buac120v.htm", "", 22, "left", "120 vac", 0);

//Sub Menu for DPDT w/LED:
	menus[66] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[66].addItem("rh2bulac24v.htm", "", 22, "left", "24 vac", 0);
	menus[66].addItem("rh2buldc24v.htm", "", 22, "left", "24 vdc", 0);
	menus[66].addItem("rh2bulac120v.htm", "", 22, "left", "120 vac", 0);

//Sub Menu for 3PDT:
	menus[67] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[67].addItem("rh3buac24v.htm", "", 22, "left", "24 vac", 0);
	menus[67].addItem("rh3buac120v.htm", "", 22, "left", "120 vac", 0);

//Sub Menu for 3PDT w/LED:
	menus[68] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[68].addItem("rh3bulac24v.htm", "", 22, "left", "24 vac", 0);
	menus[68].addItem("rh3bulac120v.htm", "", 22, "left", "120 vac", 0);

//Sub Menu for 4PDT:
	menus[69] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[69].addItem("rh4buac24v.htm", "", 22, "left", "24 vac", 0);
	menus[69].addItem("rh4buac120v.htm", "", 22, "left", "120 vac", 0);

//Sub Menu for 4PDT w/LED:
	menus[70] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[70].addItem("rh4bulac24v.htm", "", 22, "left", "24 vac", 0);
	menus[70].addItem("rh4bulac120v.htm", "", 22, "left", "120 vac", 0);

//Sub Menu for Sockets:
	menus[71] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[71].addItem("sh1b05.htm", "", 22, "left", "SPDT", 0);
	menus[71].addItem("sh2b05.htm", "", 22, "left", "DPDT", 0);
	menus[71].addItem("sh3b05.htm", "", 22, "left", "3PDT", 0);
	menus[71].addItem("sh4b05.htm", "", 22, "left", "4PDT", 0);

//Sub Menu for Idec Heavy Duty Octal Pin:
	menus[72] = new menu(140, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[72].addItem("rr2puac24v.htm", "", 22, "left", "DPDT 24 vac", 0);
	menus[72].addItem("rr2pulac24v.htm", "", 22, "left", "DPDT 24 vac w/LED", 0);
	menus[72].addItem("rr2puac120v.htm", "", 22, "left", "DPDT 120 vac", 0);
	menus[72].addItem("rr2pulac120v.htm", "", 22, "left", "DPDT 120 vac w/LED", 0);
	menus[72].addItem("sr2p05.htm", "", 22, "left", "SOCKET", 0);

//Sub Menu for Sensors:
	menus[73] = new menu(110, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[73].addItem("", "", 22, "left", "CURRENT", 74);
	menus[73].addItem("", "", 22, "left", "TEMPERATURE", 75);

//Sub Menu for Current:
	menus[74] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[74].addItem("ct800.htm", "", 22, "left", "Solid Core, 1A Fixed", 0);
	menus[74].addItem("ct805.htm", "", 22, "left", "Split Core, 1.5A Fixed", 0);
	menus[74].addItem("ct810.htm", "", 22, "left", "Solid Core, 1-150A Adjust.", 0);
	menus[74].addItem("ct815.htm", "", 22, "left", "Split Core, 1-150A Adjust.", 0);

//Sub Menu for Temperature:
	menus[75] = new menu(250, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[75].addItem("te205builder.htm", "", 22, "left", "Space", 0);
	menus[75].addItem("te701-2builder.htm", "", 22, "left", "Duct", 0);
	menus[75].addItem("te705builder.htm", "", 22, "left", "Duct Averaging", 0);
	menus[75].addItem("te703builder.htm", "", 22, "left", "Immersion & Thermowells", 0);
	menus[75].addItem("te704builder.htm", "", 22, "left", "Strap-On, Surface", 0);
	menus[75].addItem("te205builder.htm", "", 22, "left", "Outside Air", 0);
	menus[75].addItem("", "", 22, "left", "Fahrenheit Resistance Temp. Chart", 76);
	menus[75].addItem("", "", 22, "left", "Celsius Resistance Temp. Chart", 77);

//Sub Menu for Fahrenheit Resistance Temp. Chart:
	menus[76] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[76].addItem("SECT8/chart1f.pdf", "", 22, "left", "100 Ohm Platinum RTD", 0);
	menus[76].addItem("SECT8/chart3f.pdf", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[76].addItem("SECT8/chart4f.pdf", "", 22, "left", "1,000 Ohm Nickel Iron RTD", 0);
	menus[76].addItem("SECT8/chart5f.pdf", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[76].addItem("SECT8/chart7f.pdf", "", 22, "left", "10,000 Ohm Thermistor Type III", 0);
	menus[76].addItem("SECT8/chart10f.pdf", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[76].addItem("SECT8/chart12f.pdf", "", 22, "left", "10,000 Ohm Thermistor Type II", 0);
	menus[76].addItem("SECT8/chart15f.pdf", "", 22, "left", "100,000 Ohm Thermistor", 0);
	menus[76].addItem("SECT8/chart17f.pdf", "", 22, "left", "20,000 Ohm Thermistor", 0);
	menus[76].addItem("SECT8/chart21f.pdf", "", 22, "left", "1,800 Ohm Thermistor", 0);

//Sub Menu for Celsius Resistance Temp. Chart:
	menus[77] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[77].addItem("SECT8/chart1c.pdf", "", 22, "left", "100 Ohm Platinum RTD", 0);
	menus[77].addItem("SECT8/chart3c.pdf", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[77].addItem("SECT8/chart4c.pdf", "", 22, "left", "1,000 Ohm Nickel Iron RTD", 0);
	menus[77].addItem("SECT8/chart5c.pdf", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[77].addItem("SECT8/chart7c.pdf", "", 22, "left", "10,000 Ohm Thermistor Type III", 0);
	menus[77].addItem("SECT8/chart10c.pdf", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[77].addItem("SECT8/chart12c.pdf", "", 22, "left", "10,000 Ohm Thermistor Type II", 0);
	menus[77].addItem("SECT8/chart15c.pdf", "", 22, "left", "100,000 Ohm Thermistor", 0);
	menus[77].addItem("SECT8/chart17c.pdf", "", 22, "left", "20,000 Ohm Thermistor", 0);
	menus[77].addItem("SECT8/chart21c.pdf", "", 22, "left", "1,800 Ohm Thermistor", 0);

//Sub Menu for Smoke Detectors:
	menus[78] = new menu(150, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[78].addItem("sm501n.htm", "", 22, "left", "IONIZATION", 0);
	menus[78].addItem("sm501p.htm", "", 22, "left", "PHOTOELECTRIC", 0);
	menus[78].addItem("", "", 22, "left", "SAMPLING TUBES", 79);
	menus[78].addItem("", "", 22, "left", "REMOTE ALARMS", 80);
	menus[78].addItem("wp1.htm", "", 22, "left", "NEMA 3R ENCLOSURE", 0);

//Sub Menu for Sampling Tubes:
	menus[79] = new menu(80, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[79].addItem("sts2.5.htm", "", 22, "left", "2.5 Foot", 0);
	menus[79].addItem("sts5.htm", "", 22, "left", "5 Foot", 0);
	menus[79].addItem("sts10.htm", "", 22, "left", "10 Foot", 0);

//Sub Menu for Remote Alarms:
	menus[80] = new menu(185, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[80].addItem("msra.htm", "", 22, "left", "LED", 0);
	menus[80].addItem("msrap.htm", "", 22, "left", "LED w/Pilot LED", 0);
	menus[80].addItem("msrar.htm", "", 22, "left", "LED & Remote Test/Reset", 0);

//Sub Menu for Switches:
	menus[81] = new menu(170, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[81].addItem("", "", 22, "left", "AIR FLOW", 82);
	menus[81].addItem("", "", 22, "left", "CURRENT OPERATED", 86);
	menus[81].addItem("", "", 22, "left", "PHOTOELECTRIC", 87);
	menus[81].addItem("", "", 22, "left", "TIME", 91);

//Sub Menu for Air Flow:
	menus[82] = new menu(195, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[82].addItem("", "", 22, "left", "Barb Connections", 83);
	menus[82].addItem("", "", 22, "left", "Compression Connections", 84);
	menus[82].addItem("", "", 22, "left", "Air Flow Sensing Probes", 85);

//Sub Menu for Barb Connections:
	menus[83] = new menu(165, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[83].addItem("dps9.htm", "", 22, "left", "SPDT, 0.05 to 2 in. wc", 0);
	menus[83].addItem("dps10.htm", "", 22, "left", "SPDT, 0.05 to 12 in. wc", 0);

//Sub Menu for Compression Connections:
	menus[84] = new menu(165, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[84].addItem("dps11.htm", "", 22, "left", "SPDT, 0.05 to 12 in. wc", 0);
	menus[84].addItem("dps12.htm", "", 22, "left", "SPST, Manual Reset", 0);

//Sub Menu for Air Flow Sensing Probes:
	menus[85] = new menu(125, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[85].addItem("dpa04.htm", "", 22, "left", "4 in. Aspiration", 0);
	menus[85].addItem("dpa06.htm", "", 22, "left", "6 in. Aspiration", 0);
	menus[85].addItem("dps04.htm", "", 22, "left", "4 in. Impact", 0);
	menus[85].addItem("dps06.htm", "", 22, "left", "6 in. Impact", 0);

//Sub Menu for Current Operated:
	menus[86] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[86].addItem("ct800.htm", "", 22, "left", "Solid Core, 1A Fixed", 0);
	menus[86].addItem("ct805.htm", "", 22, "left", "Split Core, 1.5A Fixed", 0);
	menus[86].addItem("ct810.htm", "", 22, "left", "Solid Core, 1-150A Adjust.", 0);
	menus[86].addItem("ct815.htm", "", 22, "left", "Split Core, 1-150A Adjust.", 0);

//Sub Menu for Photoelectric:
	menus[87] = new menu(180, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[87].addItem("", "", 22, "left", "Button Type", 88);
	menus[87].addItem("", "", 22, "left", "Swivel Conduit Mounting", 89);
	menus[87].addItem("", "", 22, "left", "Turn-Lock Mounting", 90);

//Sub Menu for Button Type:
	menus[88] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[88].addItem("bt120.htm", "", 22, "left", "120 vac", 0);
	menus[88].addItem("bt287.htm", "", 22, "left", "208 to 277 vac", 0);

//Sub Menu for Swivel Conduit Mounting:
	menus[89] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[89].addItem("cms120.htm", "", 22, "left", "120 vac", 0);
	menus[89].addItem("cms287.htm", "", 22, "left", "208 to 277 vac", 0);

//Sub Menu for Turn-Lock Mounting:
	menus[90] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[90].addItem("tld20.htm", "", 22, "left", "120 vac", 0);
	menus[90].addItem("tld287.htm", "", 22, "left", "208 to 277 vac", 0);
	menus[90].addItem("tld1185.htm", "", 22, "left", "105 to 285 vac", 0);

//Sub Menu for Time:
	menus[91] = new menu(170, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[91].addItem("", "", 22, "left", "Manual", 92);
	menus[91].addItem("", "", 22, "left", "Electromechanical", 93);
	menus[91].addItem("", "", 22, "left", "Electronic with Reserve", 94);
	menus[91].addItem("", "", 22, "left", "Electronic no Reserve", 95);
	menus[91].addItem("", "", 22, "left", "Enclosures", 96);

//Sub Menu for Manual:
	menus[92] = new menu(80, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[92].addItem("klt5ma.htm", "", 22, "left", "0-5 Min.", 0);
	menus[92].addItem("klt15ma.htm", "", 22, "left", "0-15 Min.", 0);
	menus[92].addItem("klt30ma.htm", "", 22, "left", "0-30 Min.", 0);
	menus[92].addItem("klt60ma.htm", "", 22, "left", "0-60 Min.", 0);
	menus[92].addItem("klt2ha.htm", "", 22, "left", "0-2 Hrs.", 0);
	menus[92].addItem("klt4ha.htm", "", 22, "left", "0-4 Hrs.", 0);
	menus[92].addItem("klt6ha.htm", "", 22, "left", "0-6 Hrs.", 0);
	menus[92].addItem("klt12ha.htm", "", 22, "left", "0-12 Hrs.", 0);

//Sub Menu for Electromechanical:
	menus[93] = new menu(200, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[93].addItem("mil72astuz24.htm", "", 22, "left", "24-Hour No Reserve, 24 vac", 0);
	menus[93].addItem("mil72astuz120.htm", "", 22, "left", "24-Hour No Reserve, 120 vac", 0);
	menus[93].addItem("mil72aqtuzh24.htm", "", 22, "left", "24-Hour w/Reserve, 24 vac", 0);
	menus[93].addItem("mil72aqtuzh120.htm", "", 22, "left", "24-Hour w/Reserve, 120 vac", 0);
	menus[93].addItem("mil72aswuzh24.htm", "", 22, "left", "7-Day No Reserve, 24 vac", 0);
	menus[93].addItem("mil72aswuzh120.htm", "", 22, "left", "7-Day No Reserve, 120 vac", 0);
	menus[93].addItem("mil72aqwuzh24.htm", "", 22, "left", "7-Day w/Reserve, 24 vac", 0);
	menus[93].addItem("mil72aqwuzh120.htm", "", 22, "left", "7-Day w/Reserve, 120 vac", 0);

//Sub Menu for Electronic with Reserve:
	menus[94] = new menu(200, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[94].addItem("digi20a24.htm", "", 22, "left", "SPDT, 24 vac, 20 Programs", 0);
	menus[94].addItem("digi42a24.htm", "", 22, "left", "SPDT, 24 vac, 42 Programs", 0);
	menus[94].addItem("digi20a120.htm", "", 22, "left", "SPDT, 120 vac, 20 Programs", 0);
	menus[94].addItem("digi42a120.htm", "", 22, "left", "SPDT, 120 vac, 42 Programs", 0);
	menus[94].addItem("digi42224.htm", "", 22, "left", "(2) SPDT, 24 vac", 0);
	menus[94].addItem("digi422120.htm", "", 22, "left", "(2) SPDT, 120 vac", 0);

//Sub Menu for Electronic No Reserve:
	menus[95] = new menu(200, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[95].addItem("et724.htm", "", 22, "left", "In-Wall", 0);
	menus[95].addItem("89124v.htm", "", 22, "left", "SPDT, 24 vac/vdc", 0);
	menus[95].addItem("891120v.htm", "", 22, "left", "SPDT, 124 vac", 0);
	menus[95].addItem("89224v.htm", "", 22, "left", "(2) SPDT, 24 vac/vdc", 0);
	menus[95].addItem("472120v.htm", "", 22, "left", "(2) SPDT, 120 vac, 24 hr/7 day", 0);
	menus[95].addItem("892120v.htm", "", 22, "left", "(2) SPDT, 120 vac, 365 day", 0);
	menus[95].addItem("89424v.htm", "", 22, "left", "(4) SPDT, 24 vac/vdc", 0);
	menus[95].addItem("894120v.htm", "", 22, "left", "(4) SPDT, 120 vac", 0);

//Sub Menu for Enclosures:
	menus[96] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[96].addItem("e110.htm", "", 22, "left", "Indoor, Steel", 0);
	menus[96].addItem("e150.htm", "", 22, "left", "Indoor, Plastic", 0);
	menus[96].addItem("e200.htm", "", 22, "left", "Outdoor, Plastic", 0);

//Sub Menu for Temperature:
	menus[97] = new menu(270, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[97].addItem("te205builder.htm", "", 22, "left", "SPACE", 0);
	menus[97].addItem("te701-2builder.htm", "", 22, "left", "DUCT", 0);
	menus[97].addItem("te705builder.htm", "", 22, "left", "DUCT AVERAGING", 0);
	menus[97].addItem("te703builder.htm", "", 22, "left", "IMMERSION & THERMOWELLS", 0);
	menus[97].addItem("te704builder.htm", "", 22, "left", "STRAP-ON, SURFACE", 0);
	menus[97].addItem("te205builder.htm", "", 22, "left", "OUTSIDE AIR", 0);
	menus[97].addItem("", "", 22, "left", "FAHRENHEIT RESISTANCE TEMP. CHART", 98);
	menus[97].addItem("", "", 22, "left", "CELSIUS RESISTANCE TEMP. CHART", 99);

//Sub Menu for Fahrenheit Resistance Temp. Chart:
	menus[98] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[98].addItem("SECT8/chart1f.pdf", "", 22, "left", "100 Ohm Platinum RTD", 0);
	menus[98].addItem("SECT8/chart3f.pdf", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[98].addItem("SECT8/chart4f.pdf", "", 22, "left", "1,000 Ohm Nickel Iron RTD", 0);
	menus[98].addItem("SECT8/chart5f.pdf", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[98].addItem("SECT8/chart7f.pdf", "", 22, "left", "10,000 Ohm Thermistor Type III", 0);
	menus[98].addItem("SECT8/chart10f.pdf", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[98].addItem("SECT8/chart12f.pdf", "", 22, "left", "10,000 Ohm Thermistor Type II", 0);
	menus[98].addItem("SECT8/chart15f.pdf", "", 22, "left", "100,000 Ohm Thermistor", 0);
	menus[98].addItem("SECT8/chart17f.pdf", "", 22, "left", "20,000 Ohm Thermistor", 0);
	menus[98].addItem("SECT8/chart21f.pdf", "", 22, "left", "1,800 Ohm Thermistor", 0);

//Sub Menu for Celsius Resistance Temp. Chart:
	menus[99] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[99].addItem("SECT8/chart1c.pdf", "", 22, "left", "100 Ohm Platinum RTD", 0);
	menus[99].addItem("SECT8/chart3c.pdf", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[99].addItem("SECT8/chart4c.pdf", "", 22, "left", "1,000 Ohm Nickel Iron RTD", 0);
	menus[99].addItem("SECT8/chart5c.pdf", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[99].addItem("SECT8/chart7c.pdf", "", 22, "left", "10,000 Ohm Thermistor Type III", 0);
	menus[99].addItem("SECT8/chart10c.pdf", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[99].addItem("SECT8/chart12c.pdf", "", 22, "left", "10,000 Ohm Thermistor Type II", 0);
	menus[99].addItem("SECT8/chart15c.pdf", "", 22, "left", "100,000 Ohm Thermistor", 0);
	menus[99].addItem("SECT8/chart17c.pdf", "", 22, "left", "20,000 Ohm Thermistor", 0);
	menus[99].addItem("SECT8/chart21c.pdf", "", 22, "left", "1,800 Ohm Thermistor", 0);

//Sub Menu for Thermostats:
	menus[100] = new menu(180, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[100].addItem("", "", 22, "left", "LOW VOLTAGE", 101);
	menus[100].addItem("", "", 22, "left", "LINE VOLTAGE", 103);
	menus[100].addItem("", "", 22, "left", "FAN COIL", 104);
	menus[100].addItem("", "", 22, "left", "PROPORTIONAL, 0-10VDC", 109);
	menus[100].addItem("", "", 22, "left", "CHANGEOVER", 110);

//Sub Menu for Low Voltage:
	menus[101] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[101].addItem("", "", 22, "left", "SPST Univ. Wall Mount", 102);
	menus[101].addItem("1F78144.htm", "", 22, "left", "Digital Non-Programmable", 0);
	menus[101].addItem("1F78151.htm", "", 22, "left", "Digital 5/2 Programmable", 0);

//Sub Menu for SPST Univ. Wall Mount:
	menus[102] = new menu(110, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[102].addItem("rsu120.htm", "", 22, "left", "Heating Only", 0);
	menus[102].addItem("rsu310.htm", "", 22, "left", "Cooling Only", 0);
	menus[102].addItem("rsu820.htm", "", 22, "left", "Heating/Cooling", 0);

//Sub Menu for Line Voltage:
	menus[103] = new menu(170, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[103].addItem("et5ss.htm", "", 22, "left", "Heating Only", 0);
	menus[103].addItem("etd5ss.htm", "", 22, "left", "Heating or Cooling Only", 0);

//Sub Menu for Fan Coil:
	menus[104] = new menu(100, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[104].addItem("", "", 22, "left", "24 vac", 105);
	menus[104].addItem("", "", 22, "left", "120 vac", 106);
	menus[104].addItem("", "", 22, "left", "240 vac", 107);
	menus[104].addItem("", "", 22, "left", "277 vac", 108);
	menus[104].addItem("hmo5044.htm", "", 22, "left", "Wall Plate Kit", 0);

//Sub Menu for 24 vac:
	menus[105] = new menu(150, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[105].addItem("cte6101.htm", "", 22, "left", "On-Off", 0);
	menus[105].addItem("cte6102.htm", "", 22, "left", "Cool-Off-Heat 2-Pipe", 0);
	menus[105].addItem("cte6103.htm", "", 22, "left", "Cool-Off-Heat 4-Pipe", 0);

//Sub Menu for 120 vac:
	menus[106] = new menu(150, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[106].addItem("cte6111.htm", "", 22, "left", "On-Off", 0);
	menus[106].addItem("cte6112.htm", "", 22, "left", "Cool-Off-Heat 2-Pipe", 0);
	menus[106].addItem("cte6113.htm", "", 22, "left", "Cool-Off-Heat 4-Pipe", 0);

//Sub Menu for 240 vac:
	menus[107] = new menu(150, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[107].addItem("cte6121.htm", "", 22, "left", "On-Off", 0);
	menus[107].addItem("cte6122.htm", "", 22, "left", "Cool-Off-Heat 2-Pipe", 0);
	menus[107].addItem("cte6123.htm", "", 22, "left", "Cool-Off-Heat 4-Pipe", 0);

//Sub Menu for 277 vac:
	menus[108] = new menu(150, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[108].addItem("cte6131.htm", "", 22, "left", "On-Off", 0);
	menus[108].addItem("cte6132.htm", "", 22, "left", "Cool-Off-Heat 2-Pipe", 0);
	menus[108].addItem("cte6133.htm", "", 22, "left", "Cool-Off-Heat 4-Pipe", 0);

//Sub Menu for Proportional, 0-10vdc:
	menus[109] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[109].addItem("cte510110.htm", "", 22, "left", "DA, Single Setpoint", 0);
	menus[109].addItem("cte510210.htm", "", 22, "left", "RA, Single Setpoint", 0);
	menus[109].addItem("cte510310.htm", "", 22, "left", "DA/RA, Dual Setpoint", 0);
	menus[109].addItem("cte510410.htm", "", 22, "left", "DA/RA, Dual Setpoint for Reheat", 0);
	menus[109].addItem("cte510510.htm", "", 22, "left", "DA/DA, Dual Setpoint", 0);
	menus[109].addItem("hfo0027.htm", "", 22, "left", "Setpoint Stops", 0);
	menus[109].addItem("hpo006011.htm", "", 22, "left", "Horiz. Celsius Scaleplate", 0);
	menus[109].addItem("hpo006110.htm", "", 22, "left", "Vert. Fahrenheit Scaleplate", 0);
	menus[109].addItem("hpo006111.htm", "", 22, "left", "Vert. Celsius Scaleplate", 0);

//Sub Menu for Changeover:
	menus[110] = new menu(200, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[110].addItem("tc685.htm", "", 22, "left", "SPDT", 0);
	menus[110].addItem("tc686.htm", "", 22, "left", "SPDT w/Conduit Connector", 0);

//Sub Menu for Thermostat Guards:
	menus[111] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[111].addItem("", "", 22, "left", "CLEAR PLASTIC", 112);
	menus[111].addItem("btgro.htm", "", 22, "left", "OPAQUE PLASTIC", 0);
	menus[111].addItem("btg54vlw.htm", "", 22, "left", "HINGED METAL", 0);
	menus[111].addItem("btguwm.htm", "", 22, "left", "METAL", 0);

//Sub Menu for Clear Plastic:
	menus[112] = new menu(140, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[112].addItem("btgk.htm", "", 22, "left", "5-1/2 x 4-5/8 x 3-1/4D", 0);
	menus[112].addItem("btgrk.htm", "", 22, "left", "6-3/8 x 3-1/2 x 3-1/4D", 0);
	menus[112].addItem("btguk2.htm", "", 22, "left", "8-1/8 x 4-5/8 x 3-5/8D", 0);

//Sub Menu for Transducers:
	menus[113] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[113].addItem("", "", 22, "left", "ANALOG SIGNAL", 114);
	menus[113].addItem("", "", 22, "left", "E/P, I/P", 115);
	menus[113].addItem("tpe1001.htm", "", 22, "left", "P/E, P/I", 0);
	menus[113].addItem("xee1501.htm", "", 22, "left", "PWM", 0);

//Sub Menu for Analog Signal:
	menus[114] = new menu(110, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[114].addItem("ree2002.htm", "", 22, "left", "0-5 vdc Input", 0);
	menus[114].addItem("ree2005.htm", "", 22, "left", "0-10 vdc Input", 0);

//Sub Menu for E/P, I/P:
	menus[115] = new menu(200, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[115].addItem("", "", 22, "left", "3-15 psig Output", 116);
	menus[115].addItem("", "", 22, "left", "3-15 psig w/Manual Override", 117);
	menus[115].addItem("ep311020.htm", "", 22, "left", "0-20 psig Output", 0);
	menus[115].addItem("ep313020.htm", "", 22, "left", "0-20 psig w/Manual Override", 0);
	menus[115].addItem("yec1101.htm", "", 22, "left", "2-18 psig Output", 0);

//Sub Menu for 3-15 psig Output:
	menus[116] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[116].addItem("xec3001.htm", "", 22, "left", "Track Mount", 0);
	menus[116].addItem("xec3001g.htm", "", 22, "left", "Track Mount w/Gauge", 0);
	menus[116].addItem("ep311315.htm", "", 22, "left", "Panel Mount w/Gauge", 0);

//Sub Menu for 3-15 psig w/Manual Override:
	menus[117] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[117].addItem("xec3004.htm", "", 22, "left", "Track Mount", 0);
	menus[117].addItem("xec3004g.htm", "", 22, "left", "Track Mount w/Gauge", 0);
	menus[117].addItem("ep313315.htm", "", 22, "left", "Panel Mount w/Gauge", 0);

//Sub Menu for Transformers:
	menus[118] = new menu(70, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[118].addItem("", "", 22, "left", "40 VA", 119);
	menus[118].addItem("", "", 22, "left", "50 VA", 120);
	menus[118].addItem("", "", 22, "left", "75 VA", 122);
	menus[118].addItem("uet100r.htm", "", 22, "left", "100 VA", 0);

//Sub Menu for 40 VA:
	menus[119] = new menu(180, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[119].addItem("uet105.htm", "", 22, "left", "Foot Mount, Open Frame", 0);
	menus[119].addItem("t40m1.htm", "", 22, "left", "Foot/Plate/Hub Mount", 0);
	menus[119].addItem("uet112.htm", "", 22, "left", "Foot/Plate/Clamp Mount", 0);

//Sub Menu for 50 VA:
	menus[120] = new menu(170, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[120].addItem("", "", 22, "left", "Foot Mount", 121);
	menus[120].addItem("uet150.htm", "", 22, "left", "Foot/Plate/Clamp Mount", 0);
	menus[120].addItem("at150f1022.htm", "", 22, "left", "Hub Mount", 0);

//Sub Menu for Foot Mount:
	menus[121] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[121].addItem("at150b1237.htm", "", 22, "left", "120/208/240:24 vac", 0);
	menus[121].addItem("at150b1252.htm", "", 22, "left", "277:24 vac", 0);

//Sub Menu for 75 VA:
	menus[122] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[122].addItem("uet79r.htm", "", 22, "left", "Foot Mount", 0);
	menus[122].addItem("at175f1023.htm", "", 22, "left", "Foot/Hub Mount", 0);

//Sub Menu for Transmitters:
	menus[123] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[123].addItem("", "", 22, "left", "HUMIDITY", 124);
	menus[123].addItem("", "", 22, "left", "PRESSURE", 129);
	menus[123].addItem("", "", 22, "left", "TEMPERATURE/HUMIDITY", 132);

//Sub Menu for Humidity:
	menus[124] = new menu(175, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[124].addItem("", "", 22, "left", "Duct/Outside Air +/-2%", 125);
	menus[124].addItem("", "", 22, "left", "Duct/Outside Air +/-3%", 126);
	menus[124].addItem("", "", 22, "left", "Space (Wall Mount) +/-2%", 127);
	menus[124].addItem("", "", 22, "left", "Space (Wall Mount) +/-3%", 128);

//Sub Menu for Duct/Outside Air +/-2%:
	menus[125] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[125].addItem("hu2242ma.htm", "", 22, "left", "4-20 ma Output", 0);
	menus[125].addItem("hu2242vdc.htm", "", 22, "left", "0-5/0-10 vdc Output", 0);

//Sub Menu for Duct/Outside Air +/-3%:
	menus[126] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[126].addItem("hu2243ma.htm", "", 22, "left", "4-20 ma Output", 0);
	menus[126].addItem("hu2243vdc.htm", "", 22, "left", "0-5/0-10 vdc Output", 0);

//Sub Menu for Space (Wall Mount) +/-2%:
	menus[127] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[127].addItem("hu2252ma.htm", "", 22, "left", "4-20 ma Output", 0);
	menus[127].addItem("hu2252vdc.htm", "", 22, "left", "0-5/0-10 vdc Output", 0);

//Sub Menu for Space (Wall Mount) +/-3%:
	menus[128] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[128].addItem("hu2253ma.htm", "", 22, "left", "4-20 ma Output", 0);
	menus[128].addItem("hu2253vdc.htm", "", 22, "left", "0-5/0-10 vdc Output", 0);

//Sub Menu for Pressure:
	menus[129] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[129].addItem("", "", 22, "left", "NEMA 4 Enclosure", 130);
	menus[129].addItem("", "", 22, "left", "Panel Mount", 131);

//Sub Menu for NEMA 4 Enclosure:
	menus[130] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[130].addItem("pr274ma.htm", "", 22, "left", "4-20 ma Output", 0);
	menus[130].addItem("pr274vdc.htm", "", 22, "left", "0-5/0-10 vdc Output", 0);

//Sub Menu for Panel Mount:
	menus[131] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[131].addItem("pr275ma.htm", "", 22, "left", "4-20 ma Output", 0);
	menus[131].addItem("pr275vdc.htm", "", 22, "left", "0-5/0-10 vdc Output", 0);

//Sub Menu for Temperature/Humidity:
	menus[132] = new menu(185, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[132].addItem("", "", 22, "left", "4-20 ma Output 2% RH", 133);
	menus[132].addItem("", "", 22, "left", "4-20 ma Output, 3% RH", 134);
	menus[132].addItem("", "", 22, "left", "0-5/0-10 vdc Output 2% RH", 135);
	menus[132].addItem("", "", 22, "left", "0-5/0-10 vdc Output 3% RH", 136);

//Sub Menu for 4-20 ma Output 2% RH:
	menus[133] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[133].addItem("hu2262ma3.htm", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[133].addItem("hu2262ma5.htm", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[133].addItem("hu2262ma10.htm", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[133].addItem("hu2262ma12.htm", "", 22, "left", "10,000 Ohm Therm. Type II", 0);
	menus[133].addItem("hu2262ma7.htm", "", 22, "left", "10,000 Ohm Therm. Type III", 0);
	menus[133].addItem("hu2262ma17.htm", "", 22, "left", "20,000 Ohm Thermistor", 0);

//Sub Menu for 4-20 ma Output 3% RH:
	menus[134] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[134].addItem("hu2263ma3.htm", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[134].addItem("hu2263ma5.htm", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[134].addItem("hu2263ma10.htm", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[134].addItem("hu2263ma12.htm", "", 22, "left", "10,000 Ohm Therm. Type II", 0);
	menus[134].addItem("hu2263ma7.htm", "", 22, "left", "10,000 Ohm Therm. Type III", 0);
	menus[134].addItem("hu2263ma17.htm", "", 22, "left", "20,000 Ohm Thermistor", 0);

//Sub Menu for 0-5/0-10 vdc Ouptut 2% RH:
	menus[135] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[135].addItem("hu2262vdc3.htm", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[135].addItem("hu2262vdc5.htm", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[135].addItem("hu2262vdc10.htm", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[135].addItem("hu2262vdc12.htm", "", 22, "left", "10,000 Ohm Therm. Type II", 0);
	menus[135].addItem("hu2262vdc7.htm", "", 22, "left", "10,000 Ohm Therm. Type III", 0);
	menus[135].addItem("hu2262vdc17.htm", "", 22, "left", "20,000 Ohm Thermistor", 0);

//Sub Menu for 0-5/0-10 vdc Ouptut 3% RH:
	menus[136] = new menu(190, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[136].addItem("hu2263vdc3.htm", "", 22, "left", "1,000 Ohm Platinum RTD", 0);
	menus[136].addItem("hu2263vdc5.htm", "", 22, "left", "1,000 Ohm Balco RTD", 0);
	menus[136].addItem("hu2263vdc10.htm", "", 22, "left", "3,000 Ohm Thermistor", 0);
	menus[136].addItem("hu2263vdc12.htm", "", 22, "left", "10,000 Ohm Therm. Type II", 0);
	menus[136].addItem("hu2263vdc7.htm", "", 22, "left", "10,000 Ohm Therm. Type III", 0);
	menus[136].addItem("hu2263vdc17.htm", "", 22, "left", "20,000 Ohm Thermistor", 0);

//Sub Menu for Valves:
	menus[137] = new menu(70, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[137].addItem("", "", 22, "left", "WATER", 138);
	menus[137].addItem("", "", 22, "left", "STEAM", 144);

//Sub Menu for Water:
	menus[138] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[138].addItem("", "", 22, "left", "Globe 1/2 - 2 in.", 139);
	menus[138].addItem("", "", 22, "left", "Ball 1/2 - 2 in.", 141);
	menus[138].addItem("", "", 22, "left", "Flanged 2-1/2 - 6 in.", 142);
	menus[138].addItem("", "", 22, "left", "Butterfly 2 - 12 in.", 143);

//Sub Menu for Globe 1/2 - 2 in.:
	menus[139] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[139].addItem("", "", 22, "left", "Unitary 1/2 - 1 in. NPT", 140);
	menus[139].addItem("vep4500builder.htm", "", 22, "left", "Screwed 1/2 - 2 in. NPT", 0);

//Sub Menu for Water:
	menus[140] = new menu(115, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[140].addItem("vep11builder.htm", "", 22, "left", "2-Way", 0);
	menus[140].addItem("vep34builder.htm", "", 22, "left", "3-Way Diverting", 0);
	menus[140].addItem("hpo5026.htm", "", 22, "left", "3/4 in. Tailpiece", 0);
	menus[140].addItem("hpo5027.htm", "", 22, "left", "1 in. Tailpiece", 0);

//Sub Menu for Ball 1/2" to 2":
	menus[141] = new menu(115, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[141].addItem("vep45builder.htm", "", 22, "left", "2-Way", 0);
	menus[141].addItem("vep43builder.htm", "", 22, "left", "3-Way Mixing", 0);
	menus[141].addItem("vep44builder.htm", "", 22, "left", "3-Way Diverting", 0);

//Sub Menu for Flanged 2-1/2" to 6":
	menus[142] = new menu(160, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[142].addItem("vep5800builder.htm", "", 22, "left", "2-Way, Single Seated", 0);
	menus[142].addItem("vep5500builder.htm", "", 22, "left", "2-Way, Double Seated", 0);
	menus[142].addItem("vep5300builder.htm", "", 22, "left", "3-Way Mixing", 0);
	menus[142].addItem("vep5400builder.htm", "", 22, "left", "3-Way Diverting", 0);

//Sub Menu for Butterfly 2" to 12":
	menus[143] = new menu(150, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[143].addItem("vep558builder.htm", "", 22, "left", "2-Way, Metal Seat", 0);
	menus[143].addItem("vep559builder.htm", "", 22, "left", "2-Way, Rubber Lined", 0);
	menus[143].addItem("vep568builder.htm", "", 22, "left", "3-Way, Metal Seat", 0);
	menus[143].addItem("vep569builder.htm", "", 22, "left", "3-Way, Rubber Lined", 0);

//Sub Menu for Steam:
	menus[144] = new menu(135, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[144].addItem("vep4500builder.htm", "", 22, "left", "Globe 1/2 - 2 in.", 0);
	menus[144].addItem("", "", 22, "left", "Flanged 2-1/2 - 6 in.", 145);
	menus[144].addItem("", "", 22, "left", "Butterfly 2 - 12 in.", 146);

//Sub Menu for Flanged 2-1/2 - 6 in.":
	menus[145] = new menu(110, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[145].addItem("vep5800builder.htm", "", 22, "left", "Single Seated", 0);
	menus[145].addItem("vep5500builder.htm", "", 22, "left", "Double Seated", 0);

//Sub Menu for Butterfly 2" to 12":
	menus[146] = new menu(150, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[146].addItem("vep558builder.htm", "", 22, "left", "2-Way, Metal Seat", 0);
	menus[146].addItem("vep559builder.htm", "", 22, "left", "2-Way, Rubber Lined", 0);
	menus[146].addItem("vep568builder.htm", "", 22, "left", "3-Way, Metal Seat", 0);
	menus[146].addItem("vep569builder.htm", "", 22, "left", "3-Way, Rubber Lined", 0);

//Sub Menu for VAV Analog Controller-Actuators:
	menus[147] = new menu(240, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[147].addItem("", "", 22, "left", "SYSTEM CONFIGURATIONS", 148);
	menus[147].addItem("", "", 22, "left", "CONTROLLER-ACTUATORS", 149);
	menus[147].addItem("", "", 22, "left", "ROOM THERMOSTATS", 154);
	menus[147].addItem("", "", 22, "left", "ELECTRONIC AIRFLOW SENSORS", 157);
	menus[147].addItem("", "", 22, "left", "DIFF. PRESSURE AIRFLOW SENSORS", 158);
	menus[147].addItem("", "", 22, "left", "RELAY MODULES", 159);

//Sub Menu System Configurations:
	menus[148] = new menu(220, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[148].addItem("SECT11/11-1.pdf", "", 22, "left", "Electronic Flow Sensing", 0);
	menus[148].addItem("SECT11/11-2.pdf", "", 22, "left", "Diff. Pressure Airflow Sensors", 0);

//Sub Menu for Controller-Actuators:
	menus[149] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[149].addItem("", "", 22, "left", "100 Deg. Stroke", 150);
	menus[149].addItem("", "", 22, "left", "45 Deg. Stroke", 151);
	menus[149].addItem("", "", 22, "left", "5 Min. Timing", 152);
	menus[149].addItem("", "", 22, "left", "90 Sec. Timing", 153);

//Sub Menu for 100 Deg. Stroke:
	menus[150] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[150].addItem("cep4001.htm", "", 22, "left", "CCW w/SSE-1001", 0);
	menus[150].addItem("cep4011.htm", "", 22, "left", "CW w/SSE-1001", 0);
	menus[150].addItem("cep4012.htm", "", 22, "left", "CW w/SSE-1002", 0);
	menus[150].addItem("cep4013.htm", "", 22, "left", "CW w/SSE-2001", 0);
	menus[150].addItem("cep4015.htm", "", 22, "left", "CW Less Sensor", 0);

//Sub Menu for 45 Deg. Stroke:
	menus[151] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[151].addItem("cep4411.htm", "", 22, "left", "CW w/SSE-1001", 0);
	menus[151].addItem("cep4415.htm", "", 22, "left", "CW Less Sensor", 0);

//Sub Menu for 5 Min. Timing:
	menus[152] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[152].addItem("csp5001.htm", "", 22, "left", "0-10 VDC Input", 0);
	menus[152].addItem("tsp5002.htm", "", 22, "left", "2-10 VDC Input", 0);
	menus[152].addItem("tsp5003.htm", "", 22, "left", "Tri-State", 0);

//Sub Menu for 90 Sec. Timing:
	menus[153] = new menu(130, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[153].addItem("tsp5022.htm", "", 22, "left", "2-10 VDC Input", 0);
	menus[153].addItem("tsp5023.htm", "", 22, "left", "Tri-State", 0);

//Sub Menu for Room Thermostats:
	menus[154] = new menu(120, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[154].addItem("", "", 22, "left", "For 4000 Series", 155);
	menus[154].addItem("", "", 22, "left", "For CSP-5001", 156);

//Sub Menu for 4000 Series:
	menus[155] = new menu(188, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[155].addItem("cte100110.htm", "", 22, "left", "DA Cooling, 55-85 F", 0);
	menus[155].addItem("cte100111.htm", "", 22, "left", "DA Cooling, 13-29 C", 0);
	menus[155].addItem("cte100310.htm", "", 22, "left", "RA Heat/DA Cool, 55-85 F", 0);
	menus[155].addItem("cte100311.htm", "", 22, "left", "RA Heat/DA Cool, 13-29 C", 0);
	menus[155].addItem("cte100410.htm", "", 22, "left", "RA Rehat/DA Cool, 55-85 F", 0);
	menus[155].addItem("cte100411.htm", "", 22, "left", "RA Rehat/DA Cool, 13-29 C", 0);
	menus[155].addItem("cte110110.htm", "", 22, "left", "DA Fan Box Output, 55-85 F", 0);
	menus[155].addItem("cte110111.htm", "", 22, "left", "DA Fan Box Output, 13-29 C", 0);
	menus[155].addItem("cte110510.htm", "", 22, "left", "DA Night/DA Day, 55-85 F", 0);
	menus[155].addItem("cte110511.htm", "", 22, "left", "DA Night/DA Day, 13-29 C", 0);
	menus[155].addItem("hfo0027.htm", "", 22, "left", "Setpoint Stops", 0);

//Sub Menu for CSP-5001:
	menus[156] = new menu(195, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[156].addItem("cte510110.htm", "", 22, "left", "Single Setpoint DA", 0);
	menus[156].addItem("cte510210.htm", "", 22, "left", "Single Setpoint RA", 0);
	menus[156].addItem("cte510310.htm", "", 22, "left", "Dual Setpoint DA/RA", 0);
	menus[156].addItem("cte510410.htm", "", 22, "left", "Dual Setpoint DA/RA Reheat", 0);
	menus[156].addItem("cte510510.htm", "", 22, "left", "Dual Setpoint DA/DA", 0);
	menus[156].addItem("hfo0027.htm", "", 22, "left", "Setpoint Stops", 0);
	menus[156].addItem("hpo006011.htm", "", 22, "left", "Horiz. Celsius Scaleplate", 0);
	menus[156].addItem("hpo006110.htm", "", 22, "left", "Vert. Fahrenheit Scaleplate", 0);
	menus[156].addItem("hpo006111.htm", "", 22, "left", "Vert. Celsius Scaleplate", 0);

//Sub Menu for Electronic Airflow Sensors:
	menus[157] = new menu(185, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[157].addItem("sse1001.htm", "", 22, "left", "4-inch", 0);
	menus[157].addItem("sse2001.htm", "", 22, "left", "4-inch & Heat/Cool Therm.", 0);
	menus[157].addItem("sse1002.htm", "", 22, "left", "8-inch", 0);
	menus[157].addItem("sse2002.htm", "", 22, "left", "8-inch & Heat/Cool Therm.", 0);

//Sub Menu for Diff. Press. Airflow Sensors:
	menus[158] = new menu(105, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[158].addItem("sss1002.htm", "", 22, "left", "3-5/32 inch", 0);
	menus[158].addItem("sss1003.htm", "", 22, "left", "5-13/32 inch", 0);
	menus[158].addItem("sss1004.htm", "", 22, "left", "7-21/32 inch", 0);
	menus[158].addItem("sss1005.htm", "", 22, "left", "9-29/32 inch", 0);

//Sub Menu for Relay Modules:
	menus[159] = new menu(215, "vertical", 0, 0, -20, -1, "#FFFFFF", "#006600", "Arial,Narrow", 8, 
		"bold", "bold", "black", "white", 1, "gray", 2, "rollover:tri.gif:tri.gif", false, true, false, true, 5, true, 4, 4, "black");
	menus[159].addItem("ree1004.htm", "", 22, "left", "Constant Vol. w/Changeover", 0);
	menus[159].addItem("ree1005.htm", "", 22, "left", "Heating/Cooling Changeover", 0);
	menus[159].addItem("ree4001.htm", "", 22, "left", "3-Stage Electric Heat, 0-6 vdc", 0);
	menus[159].addItem("ree5001.htm", "", 22, "left", "3-Stage Electric Heat, 0-10 vdc", 0);
	menus[159].addItem("ree4002.htm", "", 22, "left", "Fan w/2-Stage Reheat, 0-6 vdc", 0);
	menus[159].addItem("ree5002.htm", "", 22, "left", "Fan w/2-Stage Reheat, 0-10 vdc", 0);
	menus[159].addItem("ree4006.htm", "", 22, "left", "Time Prop. Wet Reheat", 0);
	
} //OUTER CLOSING BRACKET. EVERYTHING ADDED MUST BE ABOVE THIS LINE.