| | | | | | | | | | |
| | PR-264 Pressure Transmitters | |  | |
| | 0-25 psig to 0-500 psig Ranges | | | | view data sheet | |
| | | | | | | | | | |
| | Media: liquid / gases compatible to 316L stainless steel |  | |
| | 100% solid state fused silicon pressure sensors | | |
| | Accuracy: 1% of full scale | | | | |
| | Overpressure: 300% of rated range | | | |
| | Burst Pressure: 500% of rated range | | | |
| | Port Connection: 1/8" NPT male | | | | |
| | | | | | | | | | |
| | | Supply | | | | | Dynacon | Net | Qty | |
| | Enclosure | Voltage | Output Signal | Pressure Range | Part No. | Each | Ordered | |
| | NEMA 4 | 12-40 VDC | 4-20 mA, 2-wire | insert from TABLE A | PR-264--MA | 185.00 | | |
| | NEMA 4 | 12-35 VAC/VDC | 0-5 VDC, 0-10 VDC | insert from TABLE A | PR-264--VDC | 185.00 | | |
| | | | | | | | | | |
| | | | | | Select desired Pressure Range Category from TABLE A below | |
| | | | | | | | | | |
| | | TABLE A. PR-264 PRESSURE RANGE CODES | | | | |
| | | R1 (psig) | 0 to 100 / 0 to 50 / 0 to 25 | | | | |
| | | R2 (psig) | 0 to 300 / 0 to 150 / 0 to 75 | Example: PR-264-R2-VDC is a pressure transmitter with |
| | | R3 (psig) | 0 to 500 / 0 to 250 / 0 to 125 | | R2 pressure ranges (dip switch selectable) |
| | | R4 (kPa) | 0 to 700 / 0 to 350 / 0 to 175 | | and field selectable 0-5 VDC or 0-10 VDC |
| | | R5 (kPa) | 0 to 2000 / 0 to 1000 / 0 to 500 | | output signal | | |
| | | R6 (kPa) | 0 to 3500 / 0 to 1750 / 0 to 875 | | | | |
| | | | | | | | | | |
