Duct Temperature Sensors


						Duct Temperature Sensors
	view data sheet							TE-702-A



							TE-702-B, C
				TE-701-C
TE-701-A						TE-701-D

		TE-701-B
				Temperature Resistance Charts

Select Sensor Code from Table A below and letter for desired Sensor Probe Length: A = 4 inches (100mm); B = 6 inches (150mm); Enter number to be purchased under Quantity C = 8 inches (150mm); D = 12 inches (150mm)

					Dynacon		Price Each Any
Description					Part No.		RTD	Thermistor	Quantity
Mounting Flange with 3-in leadwires					TE-701-A-		7.40	5.90
Mounting Flange with 6-ft plenum cable					TE-701-B-		8.80	7.40
Bulkhead Fitting (adjustable depth) with 3-in leadwires					TE-701-C-		7.40	5.90
Bulkhead Fitting (adjustable depth) with 6-ft plenum cable					TE-701-D-		8.80	7.40
Polycarbonate Enclosure (IP54), UL94V-5-0 plenum rated					TE-702-A-		9.60	8.10
NEMA 1 galvanized Steel Enclosure (IP30)					TE-702-B-		11.00	9.60
NEMA 4 painted Steel Enclosure (IP65)					TE-702-C-		19.80	18.40
			Example: TE-701-B-7-A is a 10,000 ohm type III thermistor duct temperature sensor
			with mounting flange, 6 feet of plenum cable and 4 inch probe length

		1/4" OD type 304 stainless steel				All TE-702 models have 6-inch
		waterproof probe on all models				leadwires with terminal block